| 1. | Load measuring of powered supports with magnetoelastic stress sensor
磁弹性应力传感器检测支架载荷试验研究 |
| 2. | Simulated load measuring of large power gearbox based on virtual instrument
基于虚拟仪器的大功率减速器模拟加载测控 |
| 3. | Research of load measuring device of oil film bearing used in high - speed wire rolling mill
高线轧机油膜轴承载荷特性测试装置研究 |
| 4. | Auto - loading measuring control system for liquid production in train loading crane system
定量自动装车技术在液态类物料鹤管装车系统中的应用 |
| 5. | Through finite element calculation , the internal force peak value and displacement peak value of different loading measures are compared
通过有限元分析计算,将一次施加预应力与多次施加预应力的内力峰值与位移峰值进行了比较。 |
| 6. | Its test specimens are four r . c hollow shear walls with vertical seams ; they have different heights and two loading measures . firstly , studies the stress distribution and deformation of the shear wall in elastic phase with ansys limited element program
本课题为带竖缝钢筋砼空心剪力墙板抗震性能试验研究，试验的对象为四个不同剪跨比和加载条件的带竖缝钢筋砼空心剪力墙板。 |
| 7. | By the research about the equipment long time , we have advanced and designed a set of staticly measuring weight automatic stepless adjustment empty and load equipment . the static measuring weight automatic stepless empty - load measures the vehicle load in static , then records the weight as the gist of the next brake
本文所述的静测重无级自动空重车调整装置，它采用静测重方式实现载重信号的采集，并将所采集的信号进行记忆，为输出制动压力提供依据。 |
| 8. | The experiment procedure and analysis result about exteriorly extended end - plate connection with high strength bolt are introduced primarily ; each sample ' s dimension is given . the adding load equipment , measuring apparatus placed , measuring point established is detailed . adding load measure load and m - curve is produced ; the single span gabled frames horizontal displacement formula is deduced when the horizontal concentrated force is applied to it
重点介绍了外伸端板高强螺栓连接的实验过程及实验分析结果，介绍了各组试件的形状尺寸、加载装置、测量仪器安放、测点的布置等；给出加载方式及测出的m -曲线；计算出试验节点的初始刚度；推导水平集中力作用下单跨门式刚架考虑节点半刚性的侧移计算公式。 |
| 9. | Secondly , by low - cycle and reverse horizontal loading test , their properties including strength property , deformation property and energy property are studied . we study the loading characteristic values ; the property of hysteretic curve and skeleton - frame curves ; the ductility property and stiffness degradation . at last we analyze the destroy principle and affection reasons of hollow shear wall of r . c with vertical seams in different height and loading measures , we also give the bearing capability calculation formulas and design advises for new type hollow shear wall of r . c
首先运用ansys有限元程序分析弹性阶段水平外荷载施加后，带竖缝钢筋砼空心剪力墙板内应力分布及变形情况，再在试验数据的基础上，研究低周反复水平加载条件下，各试件的强度、变形、能量特性；各试件的荷载特征值；各试件的滞回曲线、骨架曲线；延性及刚度退化等参数；最后，分析了不同剪跨比和加载条件的带竖缝钢筋砼空心剪力墙板的破坏机理和承载力影响因素，并给出不同剪跨比和加载条件的带竖缝钢筋砼空心剪力墙板承载力计算公式及设计建议。 |
| 10. | The relationship between the load measured by strain method and the load calculated according to flight parameters and the wind tunnel test data has been investigated in this thesis . the result showed that the calculation load based on the flight parameters and wind tunnel test data is acceptable in subsonic speed and gets good agreement , with the load measured by strain method
本文研究了采用应变法实测载荷和根据飞行实测参数和风洞实验数据计算载荷之间的关系，研究表明采用飞行实测参数和风洞实验的数据计算载荷在亚音速范围内是可行的，与采用应变法实测载荷是吻合的。 |
